Direction for Use:

Clean the surface using detergent, wire brush, or sandpaper, and wash and wipe it down. Remove any fungus or loose particles. Fill holes, dents, and cracks with Sarvottam Wall Putty, then sand and wipe clean. Apply two coats of Sarvottam Wall Putty with a 4-6 hour gap. After sanding, apply two coats of Sarvottam Interior Cement Primer, with a 4-6 hour interval. Apply the first topcoat, let it dry for 6-8 hours, then apply the second coat and allow it to dry overnight. Dark shades may require a third coat for optimal results.

Keep the container sealed and away from children and food. In case of eye contact, rinse immediately with water and seek medical help. Allow one week for the film to set before cleaning.