Directions for Use:

For wood surfaces, scrub new or unpainted areas with emery paper to smooth and remove dust. For previously painted surfaces, scrape off blisters, loose, or flaking paint and wash away oil, grease, polish, wax, or smoke residue, letting it dry.

For metal surfaces, scrape off loose paint, rust, and scales. Rub with emery paper or use a wet cloth with kerosene, then wash with mineral turpentine and wipe dry. Remove oil, grease, and smoke traces, allowing the surface to dry before applying two coats of Brighty Synthetic Enamel.

For masonry surfaces, ensure plaster is well-cured and remove loose paint, dust, grease, or fungus. Repair any surface defects, wash with water, dry thoroughly, and sand smooth before applying two coats of Brighty Synthetic Enamel.