To use Royal Glory Shine, first clean the surface using detergent, wire brush, or sandpaper, and wash it thoroughly. Remove any fungus or loose particles. Fill any holes, dents, or cracks with Sarvottam Wall Putty, sand with emery paper, and wipe clean. Apply two coats of Sarvottam Wall Putty with a 4-6 hour interval, sanding and wiping clean between coats. Next, apply two coats of Sarvottam Interior Cement Primer with a 4-6 hour gap between coats. For the topcoat, apply the first coat, allow 6-8 hours of drying, and then apply the second coat, letting it dry overnight. For dark shades, apply a third coat for better results.

Note: Keep the container tightly closed to prevent drying. Keep away from children and food. In case of eye contact, rinse immediately with water and seek medical attention. Allow the surface to set for a week before cleaning.